- Search

1funryd

After a decade of debate on the subject, 1FunRyd and associates are teaming up to finally produce another 1FunRyd aftermarket option for the 3rd gen chassis. 1FunRyd Performance is working on the: All Wheel Drive kit for the B16/18/20b kit that 1FunRyd currently supports. We have already completed t...

1funryd

Kevin - Cudaboy has verified that if you can find them, the 4th gen Prelude rear Tie Rod ends work for ours.
Here are the part numbers:

1. Honda Tie Rod End 53550-SS0-J61

2. Honda OEM Part 90363-SF1-000 - castel nut

1funryd

Part name: Precision 2 DR COUPE - PLASTIC MOLD Part Number: 757-2102 014 Source link: https://www.jegs.com/i/Precision/757/2102+014/10002/-1 These clips are discontinued from Honda, but found aftermarket replacements. https://i.imgur.com/pGFcijL.jpg https://i.imgur.com/qz0Gz9O.jpg https://i.imgur.c...

1funryd

(Original poster: 1FunRyd - https://www.preludepower.com/forums/showthread.php?t=244185) Ok, I wanted to post this thread up so it would be easier for all to find. And we all know it is easier to see what were talking about when we have pictures. :) ** SquishyPanda I used your picture since you had ...

1funryd

(Original poster: b20luda - https://www.preludepower.com/forums/showthread.php?t=289613) 88-91 Civic LCA 90-93 Integra LCA I recently decieded to replace the inner front lower control arm bushings due to the flex i noticed, i did some research and found that 88-91 civic and 90-93 integra LCA bushing...

1funryd

(Original poster: 88SE Lude - Jon Blakeman - https://www.preludepower.com/forums/showthread.php?t=414537) Essentially: 94-01 Acura Integra upper control arm bushings can replace the OE 3rd gen bushings but they need to be pressed in and out. OK as there is some discussion in non-specific threads I'l...

1funryd

(Original thread: https://www.preludepower.com/forums/showthread.php?t=413017) Ok so I decided to do my own bigger brake upgrade after many years of debating. Here is what I did and what was simplest and affordable. Its debatable on whether or not going bigger is going to help with stopping, for me ...

1funryd

Update: 6-26-16 - 88-91 Prelude H22 swap video - 1FunRyd's swap. Since we have grown more in this arena, I decided to make a thread that lists all know H22 swaps. If you are doing such a swap, please let me know and point me to it and I will add it to the list. I am going to put this thread in the ...

1funryd

Ok I did this for the newbies and some of us oldies as well. It is a checklist of the parts need to do the H22 basic swap. This is for the Si models only. The S models will need more work to make this swap work. Edit: 4-1-2009 I wanted to clarify some things to those who are not aware of the weight ...

1funryd

I have finally completed the AC conversion for the H22/23 swaps. This is for those who want to go with the OEM AC compressor for the H motors. It is actually easier than we initially thought and has been done and running in my H23 swap. Read below and enjoy!!! Ok let me explain it. 1. You need to by...

1funryd

All Wheel Drive Project After a decade of debate on the subject, 1FunRyd and associates are teaming up to finally produce another 1FunRyd aftermarket option for the 3rd gen chassis. 1FunRyd Performance is working on the: All Wheel Drive kit for the H2b and B16/18/20b kit that 1FunRyd currently supp...

1funryd

Yes, Daves consol is pretty....

1funryd

*Update - 11-07-2010: Please do not focus on the ebay company, you are only looking for the style of the intake that looks just like this one below. And when you search ebay for this type of intake please type in: 94-01 Integra Cold Air Intake https://i.imgur.com/wYNjxG1.jpg This is a simple Cold A...

1funryd

ExtremeDailyDrivers wrote: ↑
29 Aug 2017, 01:01
You can make one from a DC Integra.

Yes, we are still transferring old information over from files and old threads. The biggest issue is pictures.
Check back in a little, I will copy some old info that is still current.

1funryd

Steering rack bushings, are you referring to the rubber around the rack?

1funryd

Update: 4-15-17 We finally got the exhaust made up and hung, and Dave took a short drive out with it. Here is the Trubendz kit I ordered, Dave assembled it and put a how to video and review on his page - https://www.youtube.com/watch?v=epQrztPLQj0 Test drive video - https://sendvid.com/dh41tub9 Dis...

1funryd

02/10/2017 Update: Motor up and running smoothly - https://youtu.be/WcZDCoa3jz8 Next steps is to purchase new catback exhaust and put interior back in, and then start road testing. Update: 2-12-17 Another quick video of the Project B20b swap. 3. Update - 02/12/2017: Quick test launch, no catback st...

1funryd

1funryd - Group Buy open for this swap kit - 1FunRyd & MustardCat - 88-91 Prelude B16/18/20b/z Swap kit group buy 1. Update: First start up video - https://www.youtube.com/watch?v=7RKP0YIedUE 2. 02/10/2017 Update: Motor up and running smoothly - https://youtu.be/WcZDCoa3jz8 3. Update - 02/12/2017: Q...

1funryd

For those who have done the swap there has been no reported speed variance. Now most of us are using H22 swaps so that may be a factor.

1funryd

http://i1293.photobucket.com/albums/b588/lude_rider89/Capture_zpsdkhtwhzm.png http://i1293.photobucket.com/albums/b588/lude_rider89/20150814_1215011_zpskmtpjkr4.jpg http://i1293.photobucket.com/albums/b588/lude_rider89/Mobile%20Uploads/20150814_115131_zpssrryeopt.jpg http://i1293.photobucket.com/al...

1funryd

Posted by - lude_rider89 - 1988-89 Prelude Cluster Swap to 5th gen Prelude Cluster 1997-01 This swap is not 100% I have a h22 swap done to my car so the VSS is a little bias.lol but mostly Everything is in here and pls lmk if something need to be fix or wrong and pls if some one can share light the...

1funryd

Ok I did this for the newbies and some of us oldies as well. It is a checklist of the parts need to do the H22 basic swap. This is for the Si models only. The S models will need more work to make this swap work. Edit: 4-1-2009 I wanted to clarify some things to those who are not aware of the weight ...

1funryd

Update: 6-26-16 - 88-91 Prelude H22 swap video - 1FunRyd's swap. Since we have grown more in this arena, I decided to make a thread that lists all know H22 swaps. If you are doing such a swap, please let me know and point me to it and I will add it to the list. I am going to put this thread in the ...

1funryd

cudaboy - THIS FIRST POST/PAGE WILL BE UPDATED AS NEEDED MODS!!!PLEASE STICKY THIS IN F.A.Q.!!!! IF THIS THREAD HAS HELPED YOU PLEASE GIVE THE THREAD STARS AND ME REP POINTS!!!!! Super Pro/Superflex- Some Bushings had no factory pics Pictures have been saved to my Computer and sent to Photobucket, ...

1funryd

Facts about the weight of a B20 or B18 vs the H22a. i 'm in the middle of a h22 swap in my 91 lude . a friend did a b18 in his civic so i weighed the B18 at aprox 380 lb 5 speed tranny installed and sitting on a pallet on the scales. my B20 at aprox 410 lbs auto trany installed and on a pallet. now ...

1funryd

Here are the ECU codes from the manuals for easier access. I will be posting this in the 3rd gen Upgrade thread at the top of the page for quicker access. And this should allow for a more accurate search when using the search function. http://3.bp.blogspot.com/_pBIZmAlvuUY/TIvHDkifDPI/AAAAAAAAABM/xt...

1funryd

How to change a timing Belt for the B20/21 motors specifically video.

I am not sure which member on here did it of if he is one at all, but its relevant to us so here is for newbies and oldies.

How to change a timing belt for the B20 and B21:

https://www.youtube.com/watch?v=_NMAgkQPmRY

1funryd

Date: 7-31-16

The long awaited first start up....

https://www.youtube.com/watch?v=7RKP0YIedUE

:arms::trytofly:

1funryd

Date: 7-22-16 For those who are concerned about keeping your lude low...below is another update. Here is the radius rod clearance at maximum suspension compression for all you who are so concerned with keeping the lude slammed vs the H22 swap :jehon:: http://i.imgur.com/NiDqgLT.jpg http://i.imgur.co...

1funryd

Date: 7-19-16 More pics after some fixing and finagling... tweaked the shape of the downpipe and that required a little trimming of the crossmember to make it fit. It will just depend on the header people buy wether this will be required or not: http://i.imgur.com/FL3ffxt.jpg Shift Linkage : Had to ...

1funryd

Date: 7-09-16 Yes it is... so we fix it. Here are some new updates: http://i.imgur.com/U9WE3pS.jpg http://i.imgur.com/b6xwdjd.jpg Shift Linkage: Painted the T bracket and shiflinkage. http://i.imgur.com/fACjpGo.jpg PowerSteering: So we discovered that the P72 Upper and lower brackets are needed to m...

1funryd

Date: 7-01-16 Harness Ok so we shipped the OE harness to WireWorx for the custom B-Series harness that will be pretty much plug and play. We used my new H/F series swap harness as the template to see the differences. We definitely found quite a few. But no fear WireWorx is on the job. Here is what m...

1funryd

Update pics: We have settled on final engine placement for the mounts. http://i.imgur.com/zUARgPz.jpg http://i.imgur.com/s6tOmIB.jpg And we have as much clearance that is necessary to do the alternator belt while moving the engine as far back as possible which leads into the axles below. http://i.i...

1funryd

Updates for: 6-06-2016 So we have some update pics. We are having to redesign the Rear T bracket due to some spacing issues. We had to move the engine around in the bay to get the best possible axle angles and clearances on all sides. While this motor and tranny will be a nicer fit, because it stil...

1funryd

Update for: 5-30-2016 Some updates. We aquired another 88 chassis with no chassis damage. So we are moving forward. **Note: The first pics with the radius rod clearances are with the Red lude that was lowered on Neuspeed 2.25" lowering springs. So the transmission and oil pan clearances are how it ...

Search found 40 matches

B20vtec AWD swap

Re: Highest Quality Suspension Parts Master List

88-91 Honda Prelude - Molding clips Front windshield molding

88-91 Prelude A/C Compressor Contol Unit & Fan Resistor location and replacement

88-91 Prelude Lower Control Arm Bushings

OE Upper Control Arm replacements for 88-91 preludes

88-91 Prelude Big Brake Upgrade - 92-96 Prelude vtec calipers and 2007 mini cooper 11.0" Rotors

H22 Swap Thread - All known swaps to date and parts list:

H22 Swap Checklist - Parts to get...

H22/23 or B16/18/20n-z swap with AC conversion

1FunRyd - 88-91 Prelude All Wheel Drive Project

Re: Aftermarket gauges

Re: Cold Air Intake

Re: Cold Air Intake

Re: Polyurethane Bushing part# for 88-91 Prelude

Re: 88-91 Prelude - B20b/z swap

Re: 88-91 Prelude - B20b/z swap

88-91 Prelude - B20b/z swap

Re: 1988-89 Prelude Cluster Swap to 5th gen Prelude 1997-01

Re: 1988-89 Prelude Cluster Swap to 5th gen Prelude 1997-01

1988-89 Prelude Cluster Swap to 5th gen Prelude 1997-01

H22 Swap Checklist - Parts to get...

H22 Swap Thread - All known swaps to date and parts list:

Polyurethane Bushing part# for 88-91 Prelude

Engine weight Comparisons - B20a/B18/H22

88 89 90 91 ECU Codes

How to change a Timing Belt for the B20a5 and B21a1 Motors

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Re: B20b/z swap into 88-91 Prelude

Connect with your social network account

Search found 40 matches