Addco Swaybar Endlink Bushings
By: MustardCat, B20A5T (Dustin Palmer)

Link to this page:

BACK TO PRELUDE3G.COM HOME

First you need to get 2 sets of Addco bushings, 8 in each set. The Addco part number for them is 609, you should be able to get them through you local autoparts store. Alternatively I found a site that sells them online for $8.99 per set: http://performanceparts.streetracingshop.com/ just do a search for part #609 and then select Addco.

For these bushing to work correctly you need to cut/shave a little bit off them so they fit right, other than that they go on just like your stock ones. Here's what you need to do to them to make 'em fit:

I used a grinding wheel, but anything will work really. Dustin recommends a belt sander.

Here they are installed on my rear swaybar endlink rod. The install is easy just put them in place of the stock ones, you might also want to get some new washers from the hardware store that have a diameter as big as the bushing.