Finishing Touches, Bleeding System, Break-In Procedures

 

Your almost done. Use a clean rag and wipe the rotor surfaces clean and the calipers as well.

Top off the fluid reservoir and get a buddy to help you. I would recommend getting some clear hose that will fit onto the bleeder bolt head so when the fluid comes out you can direct it into a container:

Here are pictures of the finished setup:

Before and after pics:

 

---

Bedding in the new setup:

Now for the last part; bedding in the new setup. There are a few ways to go about this but the brake pads should have come with a little sheet describing their recommended procedure. You can follow that or do a google search on it.

After you bed them in, your done with the install, happy luding.